Титан Аллой Торба
Brand: GR1, GR2, GR3, GR5, GR7, GRI2
Supply standard: GB/T3624-2007 ASTM B337 seamless and welded titanium and titanium alloy pipes
GB/T3625-2007 ASTM B338 Titanium and titanium alloy tubes for heat exchangers and condensers
Specifications: Welded pipe (M state) Ф ({{0}}) × (0.5-12.0) × L (according to customer requirements)
It can produce large-diameter seamless titanium pipes ranging from 150 to 2800 to meet the needs of special industries for large-diameter seamless pipes.
Uvod u proizvod
Titanium alloy welding is a common method of metal welding. Titanium alloy has the characteristics of high strength, corrosion resistance, and lightweight. We are proud of our strict quality control testing to ensure that every pipe we produce meets or exceeds the highest industry standards. standard. We perform visual inspections, eddy current testing and other non-destructive testing to verify the quality of the tubing. Our pipes are also laboratory tested for chemical and physical properties to ensure they are safe, durable and reliable.
Brand: GR1, GR2, GR3, GR5, GR7, GRI2
Supply standard: GB/T3624-2007 ASTM B337 seamless and welded titanium and titanium alloy pipes
GB/T3625-2007 ASTM B338 Titanium and titanium alloy tubes for heat exchangers and condensers
Specifications: Welded pipe (M state) Ф ({{0}}) × (0.5-12.0) × L (according to customer requirements)
It can produce large-diameter seamless titanium pipes ranging from 150 to 2800 to meet the needs of special industries for large-diameter seamless pipes.
|
|
|
(A) |
(V) |
|
|
|
||
|
|
|
|
||||||
|
φ57×4 |
φ2-2.4 |
60 - 85 |
12-14 |
φ2.5 |
12-15 |
25 -30 |
8 -15 |
Less than or equal to 200 |
|
φ89×5 |
φ2-2.4 |
60 - 85 |
12-14 |
φ2.5 |
12-15 |
25 -30 |
8-15 |
Less than or equal to 200 |
|
|
|
C |
N |
H |
0 |
|
V |
|
|
|
|
|
GRADE 1 |
0.2 |
0.08 |
0.03 |
0.015 |
0.18 |
|
|
|
|||
|
GRADE 2 |
0.3 |
0.08 |
0.03 |
0.015 |
0.25 |
|
|||||
|
GRADE 5 |
0.4 |
0.08 |
0.05 |
0.015 |
0.2 |
5.5~6.75 |
3.5~4.5 |
|
|||
|
GRADE 7 |
0.3 |
0.08 |
0.03 |
0.015 |
0.25 |
|
0.12~0.25 |
|
|
||
|
GRADE 12 |
0.3 |
0.08 |
0.03 |
0.015 |
0.25 |
|
0.6~0.9 |
0.2~0.4 |
|
||
Pre-welding preparation:
Titanium alloy welding requires preheating. Generally, a preheating temperature of about 500 degree is used. The preheating time is based on 220V, usually 30 minutes.
Cooling should be carried out above 220 degree . If it does not reach 220 degree after welding, no cooling is allowed.
Our after-sales service
We pride ourselves on rigorous quality control testing to ensure every pipe we produce meets or exceeds the highest industry standards. We perform visual inspections, eddy current testing and other non-destructive testing to verify the quality of the tubing. Our pipes are also laboratory tested for chemical and physical properties to ensure they are safe, durable and reliable.
Popularni tagovi:
Moglo bi vam se i svidjeti
Pošaljite upit
